SysOp, Gamer, Nerd. In no particular order.

  • 4 Posts
  • 33 Comments
Joined 2 years ago
cake
Cake day: June 11th, 2023

help-circle


  • Even on ideal conditions (close to the Equator, no clouds) like in Northeast Brazil, you only get 5.5 to 6.0 kWh/m^2 of Solar energy, which means the roof of a small car, with 1 m^2 of solar panels, would only generate that amount of electricity if they were 100% efficient. That’s just 10% of the battery capacity of a small EV, like a BYD Dolphin.

    My point is, even if solar panels doubled their efficiency, they would still only capture about half the energy of the Sun (currently, the best panels are at 24% efficiency), which means only about 2.5 to 3.0 kWh per day.












  • Go for RAM size. Video editing uses a lot of it.

    Don’t bother with the X3D CPUs, video editors don’t benefit from the extra cache, the problem with the stacked dies is that it makes moving heat out of the CPU harder, so they tend to run at lower clock speeds, so with a normal CPU, you’ll get a little bit more performance on video tasks, while the hit on gaming performance will be minimal, especially if you play at higher resolutions where the GPU will be the limiting factor.

    As for storage, get an NVMe that’s big enough to store the games you’re playing and the video project you’re working at the moment, so access is quicker. for other projects and games you don’t play often, put them on an HDD or NAS with 10Gb Ethernet.

    As for graphics cards, Nvidia has better video encoding than AMD at the moment and great gaming performance, but don’t dismiss Intel Arc, they’re entry-level for gaming, but have a stellar performance in video encoding. Considering the price difference between AMD and Nvidia, you could pretty much buy an RX 7900XTX and an Arc A750 for the same price of an RTX 4080, so you could use one for gaming and the other for encoding. The advantage of this is that you could play games on the AMD card at the same time the encoding is running on the Intel.


  • Anarch157a@lemmy.worldOPtoSelfhosted@lemmy.worldRevamped install for Piped
    link
    fedilink
    English
    arrow-up
    1
    arrow-down
    1
    ·
    1 year ago

    You can run with your own reverse proxy Nginx if:

    • You expose the port used by the backend/API with a “ports:” setting on the compose file
    • Expose the socket used by the ytproxy container using a volume that points to a directory in the host

    You’ll still need 3 DNS names and a SSL certificate to cover all three.

    TO configure your Nginx, you can use the template I provided on the config/ directory as a base.