Look at the very least you should write in the blogpost clearly which parts are generated by LLMs, so your readers can decide whether to trust them.

Idk man, it seems pretty irresponsible to me to write a blogpost with stuff that you got from ChatGPT without understanding it. People will assume that if you wrote a blogpost on this then you know what you’re doing. ChatGPT gets stuff wrong all the time, and we’re talking about firewall configuration here. If it misconfigured some stuff it could leave you and your readers vulnerable to all kinds of shit.

In this case it seems to me that (luckily) there’s just a bunch of redundant routing, but the next time it could be leaking your and your readers’ torrent traffic out of the VPN tunnel, leaving you vulnerable to legal repercussions for piracy.

Please don’t authoritatively post stuff that you got from the automatic bullshit generator without understanding it.

Nice, I recently went through the same struggle of setting up this configuration based on that LinuxServer post. My main nitpick on this is that automating the ip route configuration for the qBittorrent container is a pretty important step which is not explained in the post. Leaving any manual steps in any Docker setup is pretty bad practice.

Since you’re using LinuxServer’s QBT image a good way to do this is to make use of their standard custom init scripts. You can just mount a script with the ip route commands to /custom-cont-init.d/my-routes.sh:ro on the container and it will be run automatically on each startup.

Another nitpick is that the PostDown commands in the wireguard configs are useless since you’re running them in Docker.

Fantastic, thank you

Wow thank you, this is the most useful reply I’ve received so far!

This means I don’t need to mess around with QBT’s “proxy” settings? I was pretty confused since the only options available are SOCKS/SOCKS5 and HTTP, but I’m guessing that’s a different kind of proxy than what I need…

I indeed have a domain name pointing to the VPS IP, with Caddy managing TLS. Other apps are exposed this way, and I will do the same for the qBittorrent WebUI as well. I like having Caddy as a single gateway where I can apply security configs and monitor all traffic, I was hoping I would be able to pass torrent traffic through it as well but everybody seems very much against it.

I already have wireguard setup as you describe so I guess I’ll just give up on passing torrent traffic through the proxies and just open a localhost port on the qBittorrent container…

Resetting the “time since last being told I don’t know shit on the internet” back to 0 once again…

I already have an existing and working setup used for other apps, it’s close to the one described in this blogpost. Yes, it’s complicated and inefficient, but it has reasons to be. I want to keep my qBittorrent configuration as close to this setup as reasonably possible for consistency. If your point is that it’s counterproductive to follow this setup then… fair enough. I can just route traffic from the VPS to an exposed port on the local qBittorrent container over Wireguard, but that wasn’t my preferred solution.

Running a torrent client through a proxy doesn’t isolated a process.

I was talking about network isolation, not process isolation.

make sure your traffic is routing there properly

That was pretty much what I was asking for help with.

I have already set up all of that. My setup is similar to the one in this blogpost and it’s already working for various apps that only use HTTP. What I’m trying to do is to also route BitTorrent traffic (TCP/UDP) over the same setup without opening up entirely new paths.

Yes I already have that set up with Wireguard, what I’m figuring out is how to route traffic through it.

I’m guessing what you mean is setting up port forwarding in Wireguard…

The thing is ideally I would want all connections in and out of my homeserver’s Docker network to go through the local Caddy proxy, so the app containers are isolated. That still means having at least the local Caddy acting as a TCP proxy, even if the VPS Caddy is bypassed. If that’s too much of a hassle though I can instead just expose a port on the qBittorrent container directly to the homeserver’s localhost, and forward that with wireguard to the VPS.

By “set up wireguard to route through the VPS” you mean having wireguard forward a port from the VPS to a port on the homeserver at its wireguard IP address?

qBittorrent will still need to publish the right IP address to peers though, right? So I will need to configure the proxy VPS’s IP address in qBittorrent…

Also that means binding a port on the qBittorrent container directly to the homeserver localhost. I’ve managed to keep the app containers isolated so far and it’d be nice to keep that, but if proxying the traffic is too annoying I guess I can just say fuck it and go with it.

Thank you for the links, I had found a few of these but some are new. The basic idea is there, I’ll see if any of these can work for us. I’m growing more convinced though that hosting a whole app for this super simple use case might not be worth it, I think we might pivot to just hosting a really basic static page for it.

This is way too overkill for what we need. I’m sorry, I’ve been intentionally vague about the context for this but I guess it’s too unclear. We’re an activist group planning a protest. We might have to get this set up literally tomorrow and every penny comes out of (mostly my) pocket. We’re also all paranoid about opsec and anonymity, which is why the requirement about avoiding corporate services is there. Perhaps I should have posted this in a privacy focused comm instead, I apologize.

It’s pretty overkill for what we need, and it would still fall under “corporate” for us. At that point I could just go for the static Notion page which I can get live in 5m for free.

We can set up all of those but again, that’s kinda expensive for us rn. What’s the benefit of using a CMS like Joomla versus wishthis, or even a basic Caddy/Nginx webserver with a static page?

I believe you need root to access those, plus a file manager that supports it (I use Mixplorer which does). Otherwise, as someone else suggested, you can access them from a computer over ADB or MTP.

They’re insufferable commies who keep attacking other parts of the Fediverse by… uh… commenting on posts and… ehm… responding aggressively to bigoted content. They’ve got all these sick ass stickers that we don’t and they keep flexing them in our replies which drives me crazy.

Their instance is an authoritarian distopia where queer people feel safe and they don’t waste time debating the same wrong liberal talking points every time. Also you can just call someone a dumbass if you disagree with them: a totalitarian nightmare.

Worst of all they go around straight up bullying other Fediverse users: right now I’m locked in a bathroom stall that a Hexbear user shoved me into. I’ve been here for an hour missing my maths class, and I’ve had to drink the toilet water. My tummy is starting to hurt. Stay away from Hexbear users…

Are these from a video game or Terry Pratchett’s Night Watch books?

Paraphrasing:

“I hate it when there’s a diverse market with multiple different options in active evolution. I actually preferred when we had a monopoly and everybody fucking hated it.”

The twitter meltdown is really generating the worst takes ever huh… Did we forget that people used to call Twitter “the hellsite” until a few months ago, when it was better?

Yeah what’s being described there is basically a P2P model. I still think it wouldn’t make a huge difference in the chattiness of the protocol. At best it would redistribute the load for outgoing federation messages, but not for incoming ones. An instance still has to receive each message individually, regardless of where they comes from.