+1 for Raindrop, that app is amazing, I keep watching for a self-hosted version/alternative that is as good and they are getting closer. The killer feature for me is being able to highlight stuff and then when you visit the site again you see what you have highlighted (in addition to saving them elsewhere). I also pay for premium because it’s great, I don’t use a ton of the pro features either.
So if I understand this right you will need to change the network on the port attached to the synology in your UniFi configuration or set the vlan tag in the synology OS, I would do the former. It sounds like you just added a second network/vlan to the existing interface which means you actually created a trunk and are getting the old network untagged and the new network with vlan tags which the synology is dropping. Synology OS also doesn’t really support trunked ports through the UI (even though it does support a port that only uses a vlan tag) so it’s much easier to just leave them untagged.
This is awesome, I look forward to the weekly updates and have found lots of great tools from that. Keep up the awesome work, it is very much appreciated!
They also make this one which uses a CM4 but you can control 4 machines! I have been eying it now that I can get CM4s again, thanks for the post!
I’ll second this for sure, I have been using zigbee2mqtt for several years with several different dongles and it is great.
Do you want to not use your DL380? IF no it might make a good moonlight host!
hmm the last line in the log above there says:
“[Fatal ConsoleApp: The requested address is not valid in this context. This can happen if another instance of Sonarr is already running another application is using the same port (default: 8989) or the user has insufficient permissions Press enter to exit.“
So that sounds like that the container might be running but sonarr is not. Did you ever get it working?
Your netstat command shows a process named docker-proxy using that port, which confirms what the log says. If your container isn’t running you can try to find the process using it with netstat or lsof, it might be a stale container process or something but a reboot is often faster than figuring out what it is to see if that clears up whatever is using the port.
So I am definitely not an electrician by any means but I noticed on their site the ZEN05 says “Do not install the device in a place with direct sun exposure, high temperature, or humidity.” which seems pretty silly to me for something that two lines above says it is outdoor rated hah. I bet that is why they said not to use it though, heat+melting ice will generate humidity or something. I wouldn’t be placing the device next to the heating pad if it was me anyway so I would think it would work, your logic seems sound to me, I probably wouldn’t even have asked zooz now that I think about it.
That said, I’m going to need to hear more about these heating mats, I have some sidewalks that I don’t enjoy shoveling hah.
ETA: forgot to include, I use the GE version of that ZEN05 outside (since 2019) plugged into a GFCI outlet and it works fine, it definitely has very direct sun and gets all weather too.
In addition to all of the suggestions here you can easily do this with almost all major DNS providers today like Cloudflare and AWS Route 53, there are many community containers and scripts to keep the record in sync depending on what else you are using on your network.
In addition to those things you can also thin provision lvm volumes which is helpful sometimes and it even has built in caching. It really is just a much more flexible way of using a disk, it is not an an analog for RAID, you would typically use a RAID volume with LVM on top.
the purpose of using nginx is to not have to use the port number in this scenario, the reason it works is because your DNS for that hostname still points to that machine that both containers are running on. Normal DNS A and cname records do not contain port information.
The 502 bad gateway error means that nginx is not able to connect to the upstream host for that hostname, this is where you need to use the port for the other container (5870). Do know that using localhost in docker will not have the results you are expecting, if these are on the same host you can use the name you have configured for the container as the hostname in nginx otherwise use the host IP, in your case it would be http://listmonk_app:5870.
Hope that helps!
Oh yeah for sure, every time I’m like “it can’t be spanning tree” it is spanning tree. Do you mean copper vs fiber? LC connectors can carry a variety of speeds but generally yeah I try to use fiber or DAC cables which are shielded wherever I can.
So then it doesn’t work across the ubiquity switch just to double check? If so, you will need to enable jumbo frames on that for sure and it is not enabled by default and that could also explain the throughput as it is having to fragment then defragment the frames to cross the switch or iperf is using MSS to determine that it can only send 1500 byte frames, your slower speed is about line rate for 1500 byte frames no matter the speed of the actual link.
ETA: you can verify this by pinging with a large size and setting the “do not fragment” flag, so something like ‘ping -s 2000 -M do ip.addr ’ on Linux, windows uses different flags.
Can you draw a picture of how you have all 3 switches connected with all of the wires? I am suspicious that you are creating a switching loop or spanning tree isn’t picking the optimal link on accident so I’m curious.
OP, this is the way. I use the Sonoff zigbee dongle with zigbee2mqtt on a spare pi located centrally in my house and it works great, home assistant is down in the basement. I have had nothing but issues with battery powered zwave devices of many brands and all of my light switches are zwave and they work fine so it definitely wasn’t a range problem. I will probably slowly replace those with zigbee switches as they die because the zigbee mesh has just been so much more reliable.
Do make sure to throw a few mains powered zigbee devices on your mesh to act as routers once you get more than a few devices on the mesh, it also helps with range and response times.
I definitely recommend Fully Kiosk Browser, it’s easily worth the 10$ license even if you don’t need the features. The integration into Home Assistant is great, you can do all kinds of things really easily to the app through HA like loading URLs and controlling the screen on and off, the integration is really superb.
ETA: I forgot, it also has a webui to manage it remotely. Also, I’m pretty sure it’s free still, I just mean it’s that good of an app that it’s worth whatever their license costs (I bought it a while ago).
Oh I didn’t know that, that’s cool, I’ll give it a whirl! Thanks for sharing.
So I couldn’t think of a short way to describe it without 
so I just did that, the Pi is the one on the right side near the top with the red velcro and the radios are velcroed to the door on the left. I have cheaper extensions for both radios but that was more to keep it above the power strip because I was slightly concerned and make opening the door easier.
If your adapter isn’t like buried in a metal cabinet and you have one or two zigbee router devices (like a switch or a bulb) close by it will be fine I bet, give it a whirl. Those extensions are just cheap USB 2.0 cablematters extensions from Amazon.
I also apologize for the cable management hire, that location is in transition to different gear 😀
ETA: The other radio is the z-wave radio and I was wrong above, it’s the zooz radio, guess I forgot I upgraded it hah
This is a great list! Discovered a few new ones, thanks!