Good to know, thanks!

I’m not sure about self hosted specific. There is a device called WiiM. Works with most of the major streaming services. I believe they’re also working on plexamp integration too.

There’s a thread about adding the temperature that you could try.

https://community.home-assistant.io/t/zigbee-temperature-sensor-switch-only-detected-as-light/748950/8

The reviews aren’t the best, but I did find this recently. Haven’t tried it out yet.

https://a.co/d/jb3mY12

Could you do line of sight with a long distance recording unit?

I’m guessing the author is getting some kind of referral to send them to that other site that hosts grafana. Because home assistant has a 3rd party app for grafana built in. Granted it would be a few more steps than they outlined, but it’s also not sending your data to some random company.

No particular reason. Just chose one and went with it.

FYI, for step 3 you should be able to do a “docker compose pull” with the same effect.

Edit: and on step 8.2, to minimize down time, you can also do the pull before stopping the containers.

I can’t be the only one to suffer a rapid decrease in liquid capital…

To make it better they’re on sale right now!

I feel like I have the same or similar issue, but I’m using synapse server with element app. If I’m on mobile sometimes I don’t get my notifications at all until I’m back on Wi-Fi, then a steam of them.

Not that I’m aware of, but I’m not as knowledgeable as someone else. I’m hoping some quick research or someone better can help. If I remember I can look later on this evening, but can’t at the moment.

Someone more knowledge than me can correct me, but I’m pretty sure you could buy a newer bigger drive to replace an older drive. You obviously wouldn’t get the full capacity as it would be limited by the other older slower drives. However, you would get a, theoretically, more reliable drive than a random one on eBay. Then as you replace older drives eventually you could have increased size.

Caveat is that it will put stress on the old drive to rebuild, however you’d get that with any drive you put in. General wisdom I saw says to replace all the drives. Although that can be expensive.

I’m any case make sure you have a backup before you do any of the changes.

A little off topic, but on first glance I thought that website was called fart caller.

On topic, I’ve never Heard of this service. I still haven’t setup anything like this. Might give it a try.

The lock itself is fine. I can do pretty much everything with the zwave once paired. Locking and unlocking are pretty quick and easy. You can setup a few different numbers too (haven’t played with it too much once setup). It has a sensor to detect if the door is open, but it’s pretty slow. Sometimes I can open and close the door before it knows it’s open. More of a door left open sensor.

Our door lock it well aligned, but it’s yours is off I could see it being an issue, but that’s any motorized lock.

Battery life seems pretty good considering we use the lock multiple times a day. Just 4 AA batteries I Believe. It also beeps at you when you lock/unlock before it dies so you have a fair warning.

I have one. You still need the app to setup the lock, which is unfortunate. Once it was setup I just deleted the app.

I’ve used freetaxusa the last couple of years. If the IRS one isn’t available, then I’d recommend them.

Hopefully someone smarter than me can help. You can always do what I do, and just blow up the install and start fresh. 😂

Darn.

I suppose you could also try using the lsof command to see if it shows anything different?

Some examples: https://www.cyberciti.biz/faq/unix-linux-check-if-port-is-in-use-command/