They really did it those bastards

https://github.com/ScriptGod1337/kvm

https://www.dell.com/community/en/conversations/monitors/u2723qe-kvm-using-a-keyboard-shortcut-to-switch-in-linux/647fa06af4ccf8a8de56ccc8

https://gist.github.com/lainosantos/06d233f6c586305cde67489c2e4a764d

bestie why do you have in your ? It doesn’t point to an rss feed, unless your site is an rss feed in itself? would be kinda crazy though

https://www.rssboard.org/rss-autodiscovery

should point to https://selfh.st/rss/ right?

https://docs.google.com/spreadsheets/d/1LHvT2fRp7I6Hf18LcSzsNnjp10VI-odvwZpQZKv_NCI/

It’s in German but you get the idea

Yeah. That’s what I used to do when I started out.

The simplest thing to do is install Debian on the computer and create partitions. You have 4 HDDs and 2 SSDs so it’d be stupid to create 6 separate partitions for each drive.

See in the BIOS if your motherboard supports software RAID1, so you are protected against drive failure somewhat. This will allow you to get something barebones running that’ll use at least 2 drives with redundancy. I assume the mobo RAID1 is stupid and only allows for max 2 drives, so the other drives will be just laying around useless. If that’s the case, probably use the 2 SSDs first. I see other posters recommending higher orders of RAID, but I only have 2 HDDs so I never really delved into that :P Perhaps that’s sound

With a system like that you could probably set up some small NFS for sharing your files by configuring it manually from the terminal.

Note that going with raw linux is “simpler” in the sense that it’s perhaps easier to wrap your head around or tinker with, but TrueNAS or Unraid have GUIs that will allow you to create e.g. the mentioned NFS share with a few clicks, rather than having to do it from the terminal. Depends on what you’re looking for. You could move up to TrueNAS or Unraid once you’ve played with raw Linux enough for example.

Once you have that,

I only ever dealt with ZFS and TrueNAS. ZFS will allow you to create a “partition” (pool in zfs terms) from many drives at the same time, so you’d be able to use more drives than just the two from RAID1.

The drives that you have are probably shitty SMR drives whose write speed dramatically slows down once you’re writing to them for a longer time. Consider buying CMR drives in the future, or just going all-SSD if it fits your usecase. ZFS hates SMR drives.

Just in case anybody is in the market for a new monitor and wants shortcut switching, check out Dell’s monitors with Auto KVM - https://youtu.be/ZqutRcWG2Rc?feature=shared&t=332

The keyboard shortcut switching probably works only with Dell’s proprietary Dell Display Manager software, that runs only on Windows and maybe on Mac.

Still, I’m wondering if there’s a ddutil code that means “toggle KVM to the other computer” that you could just bind in Linux.

Chiming in with my org mode setup as well:

• Keep notes on my NAS
• Mount NFS share with notes on desktop and edit with Emacs
• Create a WebDAV share of the notes (so shared both using nfs and webdav). Use the Android “Orgzly Revived” app from F-droid and log into the webdav share

I used to use Syncthing to avoid having both NFS and Webdav but it didnt sync

basically im very smol

Hey, OP here again.

Here’s what I ended up with:

• upgrading my TrueNAS CORE to TrueNAS SCALE - it was really easy, just upload a 1.3GB upload file through the web UI. CORE’s apps/plugins are based on BSD jails, where SCALE apps are based on Kubernetes/Docker, so I can any arbitrary Docker container from Dockerhub as I please, rather than being limited to BSD jails

• migrating all the VMs/LXCs to matching TrueNAS SCALE Applications. So e.g. my hand-made Navidrome LXC was migrated to the TrueNAS SCALE Application. Sometimes there was no equivalent TrueNAS app for what I was using - e.g. Forgejo, so I just ran an arbitrary container from dockerhub.

• decomissioning the Proxmox mini-pc (Lenovo M920q). I’ll sell it later or maybe turn it into a pfSense router.

I installed a custom TrueNAS app repository called Truecharts. It has some apps that the default repo doesn’t have, and it also has a nice integration with Ingress (Traefik), which allows you to easily create a reverse proxy using just the GUI.

I’m still yet to figure out how to set up Let’s Encrypt for the services I made available to the Internet. I can no longer do things the Linux way, i must do it the Kubernetes way, so I’m kind of limited. Looks like HTTP01 challenges don’t work yet and I’ll have to use DNS01.

Looking back, I’m happy I consolidated. The hypervisor was idling all the time - so what’s the point of having a second machine? Also, the only centralized machine has IPMI, so I have full remote control, and I’ll hopefully never have to plug a VGA cable again. Of course, there’s no iSCSI fault path anymore, though I’m happy I got to experiment with it.

The downside is as I said - I’m forced to do things the Kubernetes/Docker way, because that’s what TrueNAS uses and that’s the abstraction layer I’m working on. Docker containers are meant for running things, not for portability. I’m sad that I can’t just pack things up in a nice LXC and drag it around wherever I please. Still, I don’t thing I’ll be switching from TrueNAS, so perhaps portability isn’t that big of a deal.

I’m also sad that I … no longer have a hypervisor. Sure, SCALE can do VMs, but perhaps keeping TrueNAS virtualized would give me the best of both worlds.

This probably doesn’t exist because it’d be unreliable. Some sites don’t render the actual content until a few hunderd ms pass. Entering reader mode would show a mostly blank page

There’s a paywall but it’s just JavaScript based so if you turn on Firefox reader view fast enough you can read the whole article

lmao

Ah right, sorry, switched things up. Indeed, I also use my registrar’s DNS system, but if I switched to something that has an API supported by certbot (e.g. dns zones that cost 0.5 eur in large cloud providers) it would work.

I used [large american registrar], but switched to a small one in my country because I wanted to pay a local business. I found it from somebody’s compilation of companies that offer a TLD for my country, and I just picked the recommended one in that post. It was the one that charged the least.

Keep in mind that with a smaller registrar you won’t be able to get a TLS cert using the “do some shit with my domain records” method - you’ll have to always install the nginx/Apache etc. plugin for Let’s Encrypt

Thanks for making it clear that iSCSI power down is in fact one of the more grim scenarios, I couldn’t make it out how bad of a situation it is. In an enterprise environment a SAN being down would require some type of incident report.

UPS - as you suggested - would solve most of my problems to be honest.

I edited my post to clarify. TrueNAS also keeps documents, photos, torrents, music. I also use the mount feature so that the music server LXC can access music

I edited my post to clarify that TrueNAS keeps more than just VMs. It has photos, documents etc. as well.

Generally when people run two different servers at home, they keep the VM drives on the hypervisor and just use the NAS for storing bigger things like media files

This is simple and makes sense as well. My TrueNAS is only 2 HDDs, which is not ideal for VMs. I could get a larger drive SSD/M.2 drive for the hypervisor, though the Lenovo M920q supports 1xM.2 and 1x2.5" drive.

Hosting VM drives over iSCSI works in an enterprise environment, but if you can’t guarantee uptime for your storage solution then all you’re doing is adding failure modes.

Well, my whole setup comes from the fact that I wanted to cosplay as an enterprise environment (famous last words for a homelabber). I’ve been powering the TrueNAS up and down a lot due to some electricity-related construction in my apartament, and it brought out this flaw in my setup. I guess an UPS would be in order, as another poster pointed out.

It’d be nice to have Proxmox and TrueNAS side by side on one machine, but since TrueNAS forums are against the virtualization of TrueNAS (yes I know people do that, but I’m not willing) I’m somewhat stuck with having to have one bare metal machine per appliance.

I’m not sure if I understood your question correctly, but perhaps it’d be more comfortable to use the native ZFS sync mechanism over the network. It’s “just snapshots”, but in the process the whole initial dataset gets synced as well

A very simple ZFS to (Raspi+ZFS) setup is shown here, it relies on cron: https://blog.beardhatcode.be/2021/05/raspberry-pi-zfs-replication.html

If you have two e.g. TrueNAS servers thta run ZFS you can skip sanoid/syncoid and just use zfs send from one server to another directly, using the network address

I have a self hosted Forgejo instance with disabled user registration. The problem is as you mentioned ,- nobody wants to create yet another account. What’s more, it’s not possible to create PRs using e-mail.

I’d have to give out my e-mail somewhere on the git page then say “send patches here”.

It’s somewhat wise to disable user registration because users can freely fork your repos within your instance then change the fork to host whatever they want.

A new survey shows that the vast majority of senior executives say would’ve approached their return-to-work push “differently.”

“Differently” could mean a lot of things, but it’s not quite an admission of wrongdoing. The report, and by extension the execs, seem more annoyed by the lack of solid data on hybrid workplaces than they are concerned about employee satisfaction or the backlash they incurred.

Then why did you write the article Frank?

imo the purpose of those cheesy lines is more to break the ice […] rather than to swoon them

wait so you guys actually get to continue the conversation after saying the line?