the quality was better

This very much depends on when you’re taking about. Over the air television when I was young was absolutely not better quality than any streaming service now. 480i delivered by an analog interference-prone signal definitely does not compare favourably to streaming.

It’s lying in the other direction as well. We had a 2GB HDD on our computer in the late 90s that I am very sure did not cost thousands of dollars.

Robo Recall is also great, but unfortunately exclusive to Meta Rift/Quest.

I’d put money on a pretty messy driving history for the insurance to be that much.

I wouldn’t buy a new Seagate drive, let alone a refurbished one. Every Seagate I’ve ever owned died in less than five years. Every WD I’ve owned lasted until long after their capacity was so far outpaced by newer drives as to be useless.

Anecdotal, yes, but it’s happened enough to me that I’ve been soured on them for life.

A bad exhaust can be extremely loud, but while it negatively impacts comfort, noise level, and emissions it doesn’t impact the drivability or safety of the vehicle. So people who struggle to cover the costs of vehicle maintenance will often neglect it.

It’s an extremely bizarre suggestion given your request. I do want to defend the game (though not the suggestion) a little though.

It initially presents as you say, but offers you opportunities to fight back in your capacity as border control. Letting in the right people can help the resistance and incite a coup, or enable you and your families escape from the country. It isn’t just Be A Good Tankie Simulator 2013, though you can play it that way too.

For those of you who’ve never experienced the joy of PowerBuilder, this could often happen in their IDE due to debug mode actually altering the state of some variables.

More specifically, if you watched a variable or property then it would be initialised to a default value by the debugger if it didn’t already exist, so any errors that were happening due to null values/references would just magically stop.

Another fun one that made debugging difficult, “local” scoping is shared between multiple instances of the same event. So if you had, say, a mouse move event that fired ten times as the cursor transited a row and in that event you set something like integer li_current_x = xpos the most recent assignment would quash the value of li_current_x in every instance of that event that was currently executing.

I hate drive-thrus even as a driver. The intercom is always garbage, the menu is always presented in some insane arrangement that’s makes it basically impossible to peruse, paying at the window is awkward, receiving your food through the window is awkward, checking to make sure your order is correct is awkward, and to top it all off it usually takes longer than just parking and walking inside.

It is baffling to me that anyone ever willingly uses a drive-thru.

A feminine body, I am happy with, but not female.

…they literally said “feminine” and “masculine”, not “male” or “female”. Specifically using language you say you’re okay with, but still prompting this response. What exactly is your problem with what they said?

There are a few options there.

As someone else mentioned if you’re using IPv6 then it doesn’t matter, you’re already routing internally even if you’re using the public DNS name, no extra work required.

All the rest are for IPv4.

If you’re not behind CGNAT some routers/gateways are also smart enough with their routing to recognise when they need to route back to their own external IP and will loop back locally instead of making any hops out to the internet. Again, if this is the case for you then no additional work is required other than perhaps running a traceroute to confirm.

Another option is to add a local DNS entry for the name you’re using to resolve to a local IP address instead of your public address. The complexity (or even possibility) of this is going to vary considerably with your setup. If you’re running your own local DNS e.g. pihole or similar then it’s trivial. This is how mine is set up.

If all your clients are going to be on PCs (or devices you have more than the typical manufacturer allowed modicum of control over) then you can do something kind of like the previous, just with all your local hosts files.

If none of the above are options, then you’ll unfortunately have to fall back on using a local name/address, which means a slightly different client setup for devices you use exclusively in your home versus ones you might use elsewhere.

Traffic for a local Jellyfin server should definitely not be going over the internet. Also any reasonably modern client should be able to direct play most media without transcoding.

As for my own Jellyfin setup, one TV has an Nvidia shield plugged in and is using the standard Android TV client. The other is a Samsung smart TV onto which I have side-loaded the Jellyfin Tizen app.

Exactly what my employer did during the pandemic. Hired more people and reduced the amount of leased office space. Would be impossible to call us back into office now because we simply wouldn’t all fit.

No sign of that changing either. They announced just last week that they’re letting the lease on a large chunk of our remaining offices lapse next year, and have already sub-leased out about half of that. We’re fully remote for good at this point.

A temporary one that you’re expected to remove as soon as you’ve created the admin user(s) you need, but yes. It should only be there during initial setup and ideally removed before the server is ever exposed to the internet.

You are a worm through time.

The thunder song distorts you.

Happiness comes.

White pearls, but yellow and red in the eye.

Through a mirror, inverted is made right.

Leave your insides by the door.

Push the fingers through the surface into the wet.

You’ve always been the new you.

You don’t want this to be true.

I have a suspicion that was omitted purposefully to prevent people from just sharing their raw saved replays. Since if you have to clip you’ll never end up with people sharing full minute videos where the interesting bit was the last five seconds.

This is of course just my own supposition from assuming they had a reason for the omission and thinking about what that reason might be

Since they’re both Sony

This would very likely work with most modern TVs that support HDMI CEC. Manufacturers like to put their own name on it, but Sony Bravia Link, Samsung Anynet+, LG SimpLink, Roku 1-Touch, and several more, are all just different names for the same control protocol.

Windows on a handheld is just bad. It’s that simple. A Steam Deck competitor needs a handheld friendly controller focused interface that is at least as good as Valve’s. Our just straight up ship with Steam OS and use Valve’s.

SteamOS still has many instances of awkward UX and some frankly broken behavior, especially while trying to use community features, it’s just that every other offering has been worse.

Three slot bracket with a four slot cooler.

Yeah, there are different bluetooth audio profiles, one for high quality audio intended for media consumption, and one for bi-directional audio intended for telephony (and some others, but these are the relevant ones here). The “gotcha” is that in general, any attempt to consume the mic feed from a bluetooth headset will switch it to the telephony mode, so if you have them paired to a PC and an application is listening to the mic for any purpose you get stuck with much lower quality 64kbps PCM audio.